Product Center

Flash-freezing fluid SD-1

Product Introduction:

New Secondary Refrigerant, New Fresh Freezing Liquid, Supercooling Liquid, Freezing Liquid, Antifreeze, Superconductive Liquid, Refrigerant, Cold Storage Agent, Heat Storage Agent, Windshield Washer Fluid, Ready-Mixed Concrete Antifreeze Strength-Enhancing Agent, Environmentally Friendly Completion Fluid, Environmentally Friendly Snow-Melting Agent, Environmentally Friendly De-Icing Agent, Low-Temperature Water-Based Fire Extinguishing Agent, Industrial Cleaning Agent; production (excluding polluting industries) and sales of daily chemical products; assembly and sales of complete refrigeration and heating equipment sets and auxiliary machine accessories

Product Inquiry

Common physical property parameters of Flash-freezing Fluid SD-1 (Freezing point: -100℃）

Temperature	Specific heat capacity (kJ/kg·K)	Thermal conductivity (W/m·K)	Viscosity mPa·s (cp)	Density (g/ml)	Boiling point (℃)
0	1.379	0.112	2.317	1.088	214
-10℃	1.349	0.113	2.795	1.096	214
-20℃	1.318	0.115	3.433	1.104	214
-30℃	1.287	0.116	4.307	1.112	214
-40℃	1.256	0.117	5.545	1.121	214
-50℃	1.226	0.118	7.365	1.129	214
-60℃	1.210	0.119	14.028	1.137	214
-70℃	1.209	0.120	20.59	1.140	214
-80℃	1.207	0.120	31.85	1.142	214
-90℃	1.206	0.121	44.63	1.144	214
-100℃	1.205	0.122	60.8	1.147	214

Flash-freezing fluid SD-1 corrosion test (coupon specificationType II immersion for 168h）GBT 18175-2000

Test item	Pre-test weight (g)	Post-test weight (g)	Test duration in hours (g)	Post-test weight loss (mg)	Corrosion rate (g/m²h)	Corrosion rate (mm/a)
A3 steel	13.0520	13.0519	168	0.1	0.00030	0.00033
Copper	14.8241	14.8241	168	0	0.00000	0.00000
Aluminum alloy	4.6035	4.6034	168	0.1	0.00030	0.00093
304 Stainless Steel	13.1270	13.1270	168	0	0.00000	0.00000

Disclaimer:Portions of the content on this website are generated by artificial intelligence technology, and information is sourced from the internet, including but not limited to product parameters, scenario descriptions, etc. The content is for reference only and does not constitute any advice on transactions, construction, production, etc. Products, technologies, and engineering solutions are continuously updated, and changes may occur without notice. Information may contain omissions, delays, or errors; please make your own judgment. If you have any questions, please contact customer service for verification and consultation. National Customer Service Hotline:199-3077-5010

Request a Quote Now

If you have any questions, comments, or suggestions, please fill out the form below and we will respond to you as soon as possible.

No more

Partial-freezing fluid WD-3

Flash-freezing fluid SD-1

About Us

Product Center

Solutions

Brand Services

News & Information

Contact Us